drumeast8

How to Replace Door Handles Door handles are a key part of your home's decor. A new handle will bring your home's decor and interior up to date. Over time your knobs for your doors can begin to feel stiff or even break. These are indications that it's time to replace them. This guide will help you choose the right replacement door handle for your home. Door Knobs The handles on your doors will improve the appearance of your house and allow you to open and shut them. They are available in a variety of finishes, colors and styles to match your decor. If upvc replacement door handles has begun to show signs of wear or requires an upgrade it is possible to change them in just a few simple steps. The first thing you have to find is the shaft or spindle through the knob's attachment to the door. Some have a small hole that you can put an incredibly small screwdriver to loosen the set screws that hold the handle in place. Some have a slot or hole that can be used with a flathead screwdriver to push on a spring-activated nut, known as a detent. When you press the pin, the latch mechanism releases and lets you pull or push on the knob. After you have gained access to the shaft or spindle, remove the old door knob and replace it with the new one. Check that the latch is working properly before tightening the new set screws. After replacing the knob, place the latch rod over the hole on the door. Secure it by securing it to the rod system on the second knob. Make sure that the holes are lined up then thread the latch plate screws and tighten the screws. Some people opt for a smooth or brushed metal finish on their door hardware for an elegant, modern look that matches other furnishings in their homes. Others prefer a more rustic look that is a good match for spaces that are reminiscent of farmhouse. If you have family members who have mobility issues You might think about the rim lock or lever-style door knobs that require less pressure to operate. While aesthetics are traditionally the main consideration when it comes to door handle design, other factors are increasingly being considered too. Infection control and accessibility are two major issues that have led to the creation of new and innovative designs for handles, such as ones that can be operated using a person's forearm. Latch The latch that keeps your door handle open is prone to wear and tear due to the wear and tear of use. It is simple to change the latch on your door handle. This will result in an enormous difference in the way it opens and closes. Depending on the type of knob you have, the latch may be a part of the knob itself or it could be an independent piece attached to the door itself. In either case, you'll need to follow the same steps to remove and replace. The process of removing the old latch of its place is quite simple particularly if your door handle has what's known as a “magic button”. This tiny pressure-slot, found on the side knob, is what you need to press in order to pull the latch out of the handle. If your handle isn't equipped with this button the first step is to remove any cover plates that rest over the latch plate. They are typically rectangular or circular and can be removed by using a screwdriver to pry them off the handle. Some have slots where you can place your screwdriver, while others simply snap off. The next step is to remove the two machine screws that hold the latch and the plate to the door handle. You will need to store these shorter screws with a pointed tip in a secure location in order to reuse them later. After the screws are removed, you can take the latch plate as well as the mechanism from the hole, and then set it aside. Now you can begin installing the new latch. Install the latch plate into the door hole and secure it with the hardware provided. Make sure that the square pin on the inside of the latch is pointing towards the latching mechanism inside the handle, and that it lines up with the other screw chambers of the door handle. Then, push the outside latch plate on and secure it with the provided screws. Strike Plate It is typical to replace a door handle when it is loose or does not lock properly. This is usually due to misaligned components in the latching mechanism, like a strike plate that's too small or has moved up or down on the doorjamb over time. This simple project will allow you to replace your existing strike plate with a new, longer one that will give you better security and will keep your door shut. Apply a lipstick or another marking material on the bolt for the latch to determine if it's the strike plate. Close the door, and then try to latch it. If the mark is below the strike plate hole it indicates that the plate is too small and the door will not latch. If the mark is above the strike plate hole, it's most likely that the strike plate has been moved upwards or downwards on the doorjamb. It is possible to put the new strikeplate in the one you have already installed using the screws included with it, based on your door. You may need to drill holes first, and then chisel the wood to ensure a perfect fit. If this is the situation, be careful to not be too rough with the chiseling process or you could damage the integrity of the doorjamb. Installing a new box-style strike plate will give the lock a stronger hold on the doors and will require more force to open the doors. It typically requires two longer screws to secure the strike plate to the door frame. You'll need to remove the old strike plate and then drill and chisel the wood to make space for the new one. This hard-to find strike plate is made from solid brass and has a heavy-duty thickness. It's specifically designed to be used with antique rim locks. This kit includes wood screws and machine screws, allowing you to choose the right hardware for your needs. Make sure to note that the wood screws have a sharp tip, whereas the machine ones are more blunt.